Categories

New Products

Back

> Respirators / Ventilators

High performance medical mobile ventilator YSAV90A

Model: YSAV90A

Place of origin:    China
Package:              Plywood
Minimum Order: 1 set
Delivery Time:     7 days
Brand Name:      YUESEN MED

Send to a friend

Payment Terms
  • Description
  • Specification
  • Tags
High performance medical mobile ventilator YSAV90A



Prospective service and support
 The YSAV90A ventilator is an electrically controlled pneumatic ventilator integrating such functions as time, volume cycling, pressure limit, etc.  , it provides an alternation in case of irreversible lesions in respiratory muscles or
irreversible damage to upper airway to maintain the respiratory function of the patient, and also provides ventilation
assistance for the patient during the recovery from a disease or operation.
WHOLE MACHINE  UNIT HAS PASS THE CE
"The automatic conversion for standby power while AC power outage,  keep working not less than 1 hour"

Component Details

Display:  10.4''LCD Display  Following Parameters &  Real time waveform display
 
A. ) Gas drive and electrical control, time-pressure switching and pressure limit control.
 
B. ) A high-brightness digital display is used to present the control frequency, tidal volume, throughput, overall respiratory rate, spontaneous breathing frequency, etc.
 
C ) .A highly sensitive and responsive pressure sensor and a flow sensor are used to measure, control and display the airway pressure and gas flow rate and the ventilator is equipped with automatic throughput compensation. 
 
D.) In case of an abnormality to the ventilator or misoperation, the ventilator can raise a visual-audible alarm to automatically protect itself. 


Ventilator Construction: 
--Environmental Protection Material  construction, hardly to be broken.
-- Trolly: Fitted with 4 nos anti-static rubber castors; two of which are lockable for braking and easy maneuverability with foot operated brake provisions

TECHNIQUES SPECIFICATIONS
Physical specifications 
Display  10.4'' LCD Display
Mode: pneumatically powered and electrically controlled system
Trolley:  Fitted with 4 nos anti-static rubber castors; two of which are lockable for braking and
 easy maneuverability with foot operated brake provisions
Technical Specifications:
Gas requirement:  Medical oxygen and nitrous oxide with a pressure ranging
 from 280~600kpa
safety valve  <12.5  kPa
Respiratory Rate 1 ~ 99 bpm
gas concentration output 21% ~ 100%  adjustable
Maximum Minute ventilation 18L / min
modes of ventilation A/C, SIPPVIPPVSIMVPSIMVCPAP
PCVPEEP
SIGNSPONT, MANUAL
Ventilator compliance 30 Ml/kPa
PEEP: 0 ~ 1.0 kPa
Ptr:  -10 ~ 10 hPa
IMV frequency: 1~20 bpm
I/E Ratio: 4:1~1:4, Has the inverse ratio ventilation
Tidal Volume Setting Range:  50~1500ML   Display Range: 0~2000ml ;  
resolution ratio: 10ml
Inspiratory Plateau: 0~1s
Maximum Safety  Pressure ≤ 6.0kPa
Sigh:  one deep breath per 80 controlled respirations, the inspiration 
time is 1.5 times of the setting point
Pressure limit range: 1.0~ 6.0kPa
Airway pressure alarm: Audible and 
visual and with yellow and red 
color indicating
Lower: 0.1 kPa ~ 6.0 kPa;   Upper: 0 ~ 5.0  kPa
±0.2 kPa
Ventilation Volume alarm:  ≥ 18L/ MIN 
Power Supply Alarm Ac/dc power supply are after failing to send out alarm
 immediately
Alarm Time: keep >120s
The airway pressure continues to 
be higher than 15 hPa ±1 hPa for 15s±1s, then the machine will raise an audible alarm, 
the pressure will be 
displayed in red and the continuous high pressure red alarm wording is displayed on the 
screen of the 
anesthetic respirator.
Operating conditions
Ambient temperature:  10 ~ 40oC
Relative humidity: no higher than 80 %
Atmospheric pressure: 860 hPa 1060 hPa
Power requirement:  100-120 Vac, 50/60 Hz;  
Attention: the AC power supply used for the anesthesia machine must be well   grounded.
Attention: the anesthesia machine used must be equipped 
with a carbon dioxide monitor complying with ISO 9918:1993, 
an oxygen monitor complying with ISO 7767
:1997 and an expiratory 
gas volume monitor complying with 51.101.4.2 of Medical Electrical 
Equipment Part II: Special Requirements for Safety and Basic 
Performance of Anesthesia System. 
Storage
Ambient temperature:  -15oC ~ +50oC
Relative humidity:  no higher than 95 %
Atmospheric pressure:  86 kPa ~ 106 kPa.
  It should be stored in a room without corrosive 
gas and well ventilated
Package
packaging box comply with the requirement of GB/T 15464
  Between the packaging box and product, soft material 
with appropriate 
thickness provided to prevent loosening and mutual 
friction
 during transportation
  Moisture protection and rain protection to ensure that product is 
protected from natural damage. 
Safty & Alarm
Gas source pressure Immediate alarm; “high level alarm” indicator flickers
raising an 
audible alarm.
Airway Pressure Alarm The airway pressure exceeds 15hpa. The maximum delay is no 
longer than 17s. The “high level alarm” indicator 
flickers raising 
an audible alarm. 
Tidal Volume Alarm Lower than 50ml, The alarm will be raised after one 
breathing cycle. 
Ventilation Volume Alarm Lower: 0~12L/Min;   Up: 18L/ Min
Battery Voltage Alarm It alrms when the battery voltage is lower than 10.5V.
Power On Self Test Self test before working, assure it's working normally. 
STANDARD CONFIGURATIONS  
QTY NAME
1 set Main unit
4 pcs Adult threaded pipe Silica)
1 set Child threaded pipe (single use)
1 pc Oxygen Tube
1pc Y-Pipe
2pcs Mask (Silicom)
2pcs Leather Bag
2pcs Fuse
1pc Power Line
1pc Oxygen pressure reducer
4 pcs Hoop
1pc Battery
1pc  Tools Attachment
1 set humidifier
1 set English Version User Manual
 


 

Medical CPAP ventilator
Medical CPAP system
Medical infant CPAP respirator
10.4'' LCD mobile icu ventilator machine price 
High performance medical mobile ventilator YSAV90A
Get Price

Write down your demand below and we will contact you within 24h!

Your Name* :
Company Name :
Address* :
Email* :
Phone :
Contents* :
Verification Code* :
 
FoIIow Us Linkedin Google+
Scroll to top